NISSAN FIARLADY Z

JUN 350Z-R AWD

JUN 350Z-R AWD
more

PRODUCT LIST

  • CUSTOM KIT EX 3.8L

CUSTOM KIT EX 3.8L turbo

This Custom Kit for VQ35DE expands engine displacement by enlarging bore and stroker. The bore size is 95.7mm, the stroke is 87.4mm, and then the engine displacement is 3772cc. The kit includes a billet crankshaft, forged aluminum pistons, and I-beam connecting rods.

MSRP: JPY1,026,000yen

more

SPECS
BORExSTROKE:
95.7mmx87.4mm
DISPLACEMENT:
3772cc
COMP.RATIO:
8.4 : 1 (gkt=0.7mm)
  • FORGED ALUMINUM PISTON KIT
  • FORGED ALUMINUM PISTON KIT

FORGED ALUMINUM PISTON KIT

We supply many kind of piston for VQ35DE. There are C-series which was manufactured by Cosworth, and P-series which was manufactured by CP-CARRILLO. Their series have two kind of piston as low compression and high compression each.

C-Series

High Comp. (CR=11.0) ⌀95.5/96.0mm MSRP: JPY259,200yen

Low Comp. (CR=8.4) ⌀95.7mm MSRP: JPY259,200yen

P-Series

High Comp. (CR=11.5) ⌀95.75/96.0mm MSRP: JPY156,600yen

Low Comp. (CR=8.5) ⌀95.75/96.0mm MSRP: JPY156,600yen

more

  • I-BEAM CONNECTING ROD

I-BEAM CONNECTING ROD

The JUN connecting rod is made by shaving in order to pursue lightness and strength, this form has no futility. The material of a connecting rod is SCM440. If big end is transformed at the time of high rotation, a metal will burn. In order to prevent the phenomenon, it was made the form which distributes stress.
The 6mm stroker rod is special product which can use with 3.8L crank shaft. You can increase displacement volume as an NA engine by using the high compression piston with this product.

STOCK SIZE MSRP: JPY210,600yen

6mm stroker MSRP: JPY259,200yen

more

  • CRANK SHAFT

BILLET CRANK SHAFT

The JUN crankshaft made from shaving has flexibility in a design as compared with a forge product. A high rigidity and balance rate help acceleration with no stumble, accordingly it is able to build a high response engine.
This crank shaft extends 6mm. You can increase displacement volume by using the special rod for this product.

6mm stroker MSRP: JPY864,000yen

more

  • HIGH LIFT CAMSHAFT

HIGH LIFT CAMSHAFT

This camshaft was ground from forged material. The form (profile) will become the best logically because cam design has flexibility by grinding from material.

64(264)-10.3 / 66(264)-10.8

MSRP: JPY45,360yen

68(272)-10.8 / 68(272)-11.3 / 70(280)-11.3

MSRP: JPY51,840yen

more

* The camshaft which is 11.0mm or higher lift of the profile needs to use uprated valve springs. You need to prepare application valve spring separately.

  • REINFORCED VALVE GUIDE

REINFORCED VALVE GUIDE

The JUN Racing Valve Guide is improved its strength and heat conduction by using raw material, phosphorus-bronze. This therefore avoid the any damage from high rotation of tuned engine. We recommend our valve guides when you overhaul your cylinder head.

Phosphor bronze JPY45,360yen

more

  • CYLINDER HEAD BOLT

* The pictures are for the other vehicle.

REINFORCED HEAD BOLT

The high-boost and high-compression engine tends to occur distortion between the cylinder head and the cylinder block as a junction part of combustion chamber. We are providing the product which is supplied from ARP Racing USA.

Stud type JPY42,120yen

more

  • CRANK MAIN CAP STUD

* The pictures are for the other vehicle.

REINFORCED CRANK MAIN CAP BOLT

Crankshaft is one of the crucial part that have weighing by combustion power that changed rotation. Crank Main Cap Stud Bolt is a shaft bearing part of crank shaft that fixes a block and a cap connecting together. If this part gets thermal expansion a crank housing could not be kept in circular shape and it could be possible to get scorching. We are providing the product which is supplied from ARP Racing USA.

Stud type JPY41,040yen

more

  • CONNECTING ROD BOLT

REINFORCEMENT CONNECTING ROD BOLT

Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly.

MSRP: JPY41,040yen

more

  • FLYWHEEL

FORGED CHROMOLY FLYWHEEL

JUN could achieve manufacturing its original flywheels about 200% more strength compared with normal flywheels. It was forged using Chrome-molybdenum steel. The power of inertia rotation can be decreased by reducing the excess weight, and therefore, its strength directly passed through to the high response.

Lightweight: JPY48,600yen

more

  • CLUCH KIT with SPORT DISC
  • * The pictures are for the other vehicle.

SINGLE SPORT CLUTCH KIT

The JUN clutch kits can strengthen your drive train all at once because all of our clutch kit contains clutch disc, clutch cover, and lightweight flywheel. Our new lineups which are the clutch disc and the clutch cover have strength enough for the race scene.

Sport disc w/ Lightweight flywheel: JPY105,840yen

more

  • RADIATOR CAP

RADIATOR CAP

This radiator cap uprates the pressure of release valve. That result, boiling point of coolant is raised by increases pressure of piping. By this, it raises the cooling efficiency of the radiator, and will repress overheat.

Type S (1.3, 1.5kg/cm2)
Type N (1.3kg/cm2)

MSRP: JPY3,024yen

more

  • SIDE SILLS FOAMING URETHANE REINFORCEMENT KIT

SIDE SILLS FOAMING URETHANE KIT

This new reinforcement method makes high rigidity feel simply, so that it reverses old common sense. The car which performed urethane body reinforcement can feel the difference, when it get in and departs, you feel a motion of a car. The car which has constructed the roll cage etc. is still more effective. Although there is a difference in the ratio of an effect also by the new car or the old vehicle, rigidity is raised certainly.

MSRP: JPY32,400yen

more

  • UNIVERSAL REAR SEAT BOARD

UNIVERSAL REAR SEAT BOARD

After a rear seat is removed, this product is used as a bulkhead. The Universal Rear Seat Board will make a stylish cockpit without weight because it was made by the carbon. Cut these boards along the form of your car, and use.

* Shape it to the form of your car

MSRP: JPY32,400yen

more

  • UNIVERSAL FRONT DIFFUSER
  • UNIVERSAL FRONT DIFFUSER

UNIVERSAL FRONT DIFFUSER

An air pocket in central part amplifies incoming air from bottom of front bumper temporarily and the compressed air quickens speed, and it is drained behind your vehicle. Strakes before front wheels reduce turbulence by the tires, and the air deflects to center of vehicle. The quickened air makes down force occur through bottom of vehicle. Moreover by the type of vehicle, this diffuser has effect which lowers water and intake temperature because it pulls out heat from engine room.

FRP MSRP: JPY47,520yen

CARBON MSRP: JPY90,720yen

more

  • CUSTOM KIT EX 3.8L
  • PISTON KIT
  • CONNECTING ROD
  • CRANK SHAFT
  • HIGH LIFT CAMSHAFT
  • REINFORCED VALVE GUIDE
  • REINFORCED HEAD BOLT
  • REINFORCED CRANK MAIN CAP BOLT
  • REINFORCED CONNECTING ROD BOLT
  • LIGHTWIGHT FLYWHEEL
  • CLUTCH KIT
  • RADIATOR CAP
  • FOAMING URETHANE REINFORCEMENT KIT
  • UNIVERSAL REAR SEAT BOARD
  • EXTERIORS

JUN 350Z-R AWD

  • APL 2007 SPEC GRAPH

APL 2007

BASIC DATA

Car Name
JUN 350Z-R AWD
Model
NISSAN 350Z (Z33)
Engine Type
VQ35DE
Boost
147.1kPa (1.5kgf/cm2)
MAX Power
609.0kW (828ps) / 6370rpm
MAX Torque
943.4N-m (96.2kgf-m) / 5900rpm

ENGINE

Bore x Stroke
95.7mm x 87.4mm
Engine Displacement
3772cc
Piston
JUN Forged Aluminum 95.7mm (Custom Kit)
Connecting Rod
JUN I-Beam (Custom Kit)
Crank shaft
JUN Billet (Custom Kit)
Camshaft
JUN Prototype 272-10.8 (INT & EXH)
Head gasket
Nismo

EXTERNAL ENGINE

Air Cleaner
GReddy Airinx Universal 80mm x 2
Intake Manifold
GT-SPL Surge tank Ver.2
Exhaust Manifold
SPL 3-1 (dual)
Turbocharger
GReddy TD05SH 18G-8cm
Intercooler
GReddy Type 6 (Inner fin)
Muffler
SUS304 75mm side outlet (no catalyzer)
Radiator
GReddy 13-layers (for BNR34) x 2

FUEL

Fuel Controller
HKS F-CON V-pro SPL
Injector
SARD 1000cc
Fuel Pump
SARD 235L x 2

DRIVE TRAIN

Clutch
Ogura Prototype Triple plates
Transmission
Holinger (Reviced)
LSD
CUSCO LSD-RS (F:1 way / R:1.5 way)

SUSPENSION

Suspension
ZEAL Super Function SPL
Reinforcement
Carbon Composite Strut Bar
Tire name/Size
ADVAN NEOVA AD08 F:265/35R19 R:295/35R19
Wheel name/Size
ADVAN Racing RZ DF F19x10.0J+35 R:19x10.0J+15

FOOTWORK

Brake
ENDLESS F:6 pistons 370mm disc / R:4 pistons 332mm disc
Tire
ADVAN A048 265/35-18
Wheel
ADVAN RG-II F:10.0J-18(+25) / R:10.0J-18(+35)

EXTERIORS

Exteriors
JUN Bonnet hood (custom-made), SARD GT-Wing Pro

APL 2007

Power Curve